Qlogic FastLinQ 3400 Series User Manual page 135

8–iSCSI Protocol
iSCSI Offload in Windows Server
Message
Number
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Table 8-5. Offload iSCSI (OIS) Driver Event Log Messages
Severity
Error CHAP Response given by the target did not match the
expected one. Dump data contains the CHAP response.
Error Header Digest is required by the initiator, but target did not
offer it.
Error Data Digest is required by the initiator, but target did not offer
it.
Error Connection to the target was lost. The initiator will attempt to
retry the connection.
Error Data Segment Length given in the header exceeds MaxRec-
vDataSegmentLength declared by the target.
Error Header digest error was detected for the given PDU. Dump
data contains the header and digest.
Error Target sent an invalid iSCSI PDU. Dump data contains the
entire iSCSI header.
Error Target sent an iSCSI PDU with an invalid opcode. Dump
data contains the entire iSCSI header.
Error Data digest error was detected. Dump data contains the cal-
culated checksum followed by the given checksum.
Error Target trying to send more data than requested by the initia-
tor.
Error Initiator could not find a match for the initiator task tag in the
received PDU. Dump data contains the entire iSCSI header.
Error Initiator received an invalid R2T packet. Dump data contains
the entire iSCSI header.
Error Target rejected an iSCSI PDU sent by the initiator. Dump
data contains the rejected PDU.
Error Initiator could not allocate a work item for processing a
request.
Error Initiator could not allocate resource for processing a request.
Information Initiator received an asynchronous logout message. The Tar-
get name is given in the dump data.
Error Challenge size given by the target exceeds the maximum
specified in iSCSI specification.
Message
107 83840-546-00 E