Safety Precautions; Preinstallation Checklist - Qlogic FastLinQ 3400 Series User Manual

2–Installing the Hardware

Safety Precautions

Safety Precautions
WARNING
!
The adapter is being installed in a system that operates with voltages that
can be lethal. Before you open the case of your system, observe the
following precautions to protect yourself and to prevent damage to the
system components.
 Remove any metallic objects or jewelry from your hands and wrists.
 Make sure to use only insulated or nonconducting tools.
 Verify that the system is powered OFF and is unplugged before you
 Install or remove adapters in a static-free environment. The use of a

Preinstallation Checklist

1. Verify that your system meets the hardware and software requirements
listed under
2. Verify that your system is using the latest BIOS.
1. If your system is active, shut it down.
2. When system shutdown is complete, turn off the power and unplug the
power cord.
3. Remove the adapter from its shipping package and place it on an antistatic
surface.
4. Check the adapter for visible signs of damage, particularly on the edge
connector. Never attempt to install a damaged adapter.
touch internal components.
properly grounded wrist strap or other personal antistatic devices and an
antistatic mat is strongly recommended.
System Requirements.
NOTE
If you acquired the adapter software on a disk or from the QLogic Web
Site driverdownloads.qlogic.com), verify the path to the adapter driver
files.
9 83840-546-00 E