Mba Boot Protocol Configuration - Qlogic FastLinQ 3400 Series User Manual

8–iSCSI Protocol
iSCSI Boot
Target as First HDD
LUN Busy Retry Count
IP Version
HBA Boot Mode

MBA Boot Protocol Configuration

To configure the boot protocol
1. Restart your system.
2. In the QLogic 577xx/578xx Ethernet Boot Agent banner
CTRL+S.
Figure 8-1. QLogic 577xx/578xx Ethernet Boot Agent
Table 8-1. Configuration Options (Continued)
Option
Allows specifying that the iSCSI target drive will appear as
the first hard drive in the system.
Controls the number of connection retries the iSCSI Boot ini-
tiator will attempt if the iSCSI target LUN is busy.
This option specific to IPv6. Toggles between the IPv4 or
IPv6 protocol. All IP settings will be lost when switching from
one protocol version to another.
Set to disable when the host OS is configured for software
initiator mode and to enable for HBA mode. This option is
available only on 8400 Series adapters. This parameter can-
not be changed when the adapter is in Multi-Function mode.
Description
71
(Figure 8-1), press
83840-546-00 E