Qlogic FastLinQ 3400 Series User Manual page 259

15–QLogic Teaming Services
Event Log Messages
Table 15-9. VBD Event Log Messages (Continued)
Message
Severity
Number
2 Informational
3 Informational
4 Informational
5 Informational
6 Informational
7 Informational
8 Informational
Message
The network link is
down. Check to make
sure the network cable
is properly connected.
The network link is up.
Network controller
configured for 10Mb
half-duplex link.
Network controller
configured for 10Mb
full-duplex link.
Network controller
configured for 100Mb
half-duplex link.
Network controller
configured for 100Mb
full-duplex link.
Network controller
configured for 1Gb
half-duplex link.
231
Cause
The adapter has lost
its connection with its
link partner.
The adapter has
established a link.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
Corrective Action
Check that the net-
work cable is con-
nected, verify that the
network cable is the
right type, and verify
that the link partner
(for example, switch or
hub) is working cor-
rectly.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
83840-546-00 E