Firmware Upgrade; Upgrading Firmware For Windows - Qlogic FastLinQ 3400 Series User Manual

7

Firmware Upgrade

QLogic provides a Windows and Linux utility for upgrading adapter firmware and
bootcode. Each utility executes as a console application that can be run from a
command prompt. Upgrade VMware firmware with the VMware vSphere plug-in.

Upgrading Firmware for Windows

To upgrade firmware for Windows:
1.
2.
3.
C:WinQlgcUpg.bat
******************************************************************************
QLogic Firmware Upgrade Utility for Windows v2.7.14.0
******************************************************************************
C Brd MAC
- ---- ------------ --- ------------------------------------------------------
0 16A1 000E1E508E20 Yes [0061] QLogic 57840 10 Gigabit Ethernet #61
1 16A1 000E1E508E22 Yes [0062] QLogic 57840 10 Gigabit Ethernet #62
Upgrading MFW
Forced upgrading MFW1 image: from ver MFW1 7.10.39 to ver MFW1 7.12.31
Upgrading MFW2 image to version MFW2 7.12.31
Upgrading SWIM1B image: to version SWIM1 7.12.31
Upgrading SWIM2B image: to version SWIM2 7.12.31
Upgrading SWIM3B image: to version SWIM3 7.12.31
Upgrading SWIM4B image: to version SWIM4 7.12.31
Upgrading SWIM5B image: to version SWIM5 7.12.31
Upgrading SWIM6B image: to version SWIM6 7.12.31
Upgrading SWIM7B image: to version SWIM7 7.12.31
Upgrading SWIM8B image: to version SWIM8 7.12.31
Go to driverdownloads.qlogic.com
upgrade utility for your adapter.
Install the firmware upgrade utility.
In a DOS command line, type the following command:
Drv
and download the Windows firmware
Name
59 83840-546-00 E