Qlogic FastLinQ 3400 Series User Manual page 31

1–Product Overview
Features

Manageability








Advanced network features







Logical link control (IEEE Std 802.2)

High-speed on-chip reduced instruction set computer (RISC) processor

Integrated 96KB frame buffer memory

Quality of service (QoS)

Serial gigabit media independent interface (SGMII)/
Gigabit media independent interface (GMII)/
Media independent interface (MII)

256 unique MAC unicast addresses

Support for multicast addresses through the 128 bits hashing hardware
function

Serial flash NVRAM memory

JTAG support
QConvergeConsole GUI. See the QConvergeConsole GUI Installation
Guide, QConvergeConsole GUI online help and the QLogic Control
Suite Command Line Interface User's Guide for more information.
QConvergeConsole Plug-ins for vSphere
Server software. For more information, see the QConvergeConsole
Plug-ins for vSphere User's Guide.
Supports the pre-execution environment (PXE) 1.0 and 2.0
specifications
Universal management port (UMP)
System management bus (SMBus) controller
Advanced configuration and power interface (ACPI) 1.1a compliant
(multiple power modes)
Intelligent platform management interface (IPMI) support
Jumbo frames (up to 9,600 bytes). The OS and the link partner must
support jumbo frames.
Virtual LANs
IEEE Std 802.3ad Teaming
Smart Load Balancing™ (SLB) teaming
Flow control (IEEE Std 802.3x)
LiveLink™ (supported in both the 32-bit and 64-bit Windows operating
systems)
®
3
through VMware vCenter
83840-546-00 E
™