Driver Messages - Qlogic FastLinQ 3400 Series User Manual

5–Linux Driver Software

Driver Messages

Driver Messages
The following are the most common sample messages that may be logged in the
/var/log/messages file. Use dmesg -n <level> to control the level at which
messages appear on the console. Most systems are set to level 6 by default. To
see all messages, set the level higher.

bnx2x Driver

bnx2i Driver

bnx2fc Driver
bnx2x Driver
Driver Sign On
QLogic 8400/3400 Series 10 Gigabit Ethernet Driver
bnx2x v1.6.3c (July 23, 20xx)
CNIC Driver Sign On (bnx2 only)
QLogic 8400/3400 Series cnic v1.1.19 (Sep 25, 20xx)
NIC Detected
eth#: QLogic 8400/3400 Series xGb (B1)
PCI-E x8 found at mem f6000000, IRQ 16, node addr 0010180476ae
cnic: Added CNIC device: eth0
Link Up and Speed Indication
bnx2x: eth# NIC Link is Up, 10000 Mbps full duplex
Link Down Indication
bnx2x: eth# NIC Link is Down
MSI-X Enabled Successfully
bnx2x: eth0: using MSI-X
bnx2i Driver
BNX2I Driver Signon
QLogic 8400/3400 Series iSCSI Driver bnx2i v2.1.1D (May 12, 20xx)
42 83840-546-00 E