Installing Qlogic Drivers; Installing The Microsoft Iscsi Initiator; Configure Microsoft Initiator To Use Qlogic's Iscsi Offload - Qlogic FastLinQ 3400 Series User Manual

8–iSCSI Protocol
iSCSI Offload in Windows Server

Installing QLogic Drivers

Install the Windows drivers as described in

Installing the Microsoft iSCSI Initiator

For Windows Server 2008 and later, the iSCSI initiator is included inbox. To
download the iSCSI initiator from Microsoft, go to
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=18986
and locate the direct link for your system.

Configure Microsoft Initiator to Use QLogic's iSCSI Offload

Now that the IP address has been configured for the iSCSI adapter, you need to
use Microsoft Initiator to configure and add a connection to the iSCSI target using
QLogic iSCSI adapter. See Microsoft's user guide for more details on Microsoft
Initiator.
1. Open Microsoft Initiator.
2. Configure the initiator IQN name according to your setup. To change, click
Change.
Figure 8-13. iSCSI Initiator Properties
99
Chapter 4, Windows Driver Software.
83840-546-00 E