Adapter Leds - Qlogic FastLinQ 3400 Series User Manual

A

Adapter LEDS

For copper-wire Ethernet connections, the state of the network link and activity is
indicated by the LEDs on the RJ-45 connector, as described in
optic Ethernet connections and SFP+, the state of the network link and activity is
indicated by a single LED located adjacent to the port connector, as described in
Table
network link and activity.
Table A-1. Network Link and Activity Indicated by the RJ-45 Port LEDs
Port LED
Link LED
Activity LED
Table A-2. Network Link and Activity Indicated by the Port LED
Off
Continuously illuminated
Blinking
A-2. The QCC GUI also provides information about the status of the
LED Appearance
Off
Continuously illuminated
Off
Blinking
LED Appearance
No link (cable disconnected)
Link
No network activity
Network activity
No link (cable disconnected)
Link
Network activity
257
Table A-1. For fiber
Network State
Network State
83840-546-00 E