Qlogic FastLinQ 3400 Series User Manual page 269

17–User Diagnostics in DOS
Performing Diagnostics
Command
Options
uediag -fibp
uediag -fmba
<mba_image>
uediag -fnvm
<raw_image>
uediag -fump
<ump_image>
uediag -help
uediag -I
<iteration#>
uediag -idmatch
uediag -log
<logfile>
uediag -mba
<1/0>
uediag -mbap
<n>
uediag -mbav
<1/0>
uediag -mbavval
<n>
Table 17-1. uediag Command Options (Continued)
Programs iSCSI configuration software. Used only with -fib
<ib_image>.
Specifies the bin file to update the MBA.
Programs the raw image into NVM.
Specifies the bin file to update UMP firmware.
Displays the QLogic 8400/3400 Series User Diagnostics (uediag)
command options.
Specifies the number of iterations to run on the selected tests.
Enables matching of VID, DID, SVID, and SSID from the image
file with device IDs: Used only with -fnvm <raw_image>.
Logs the tests results to a specified log file.
Enables/disables Multiple Boot Agent (MBA) protocol.
1 = Enable
0 = Disable
Sets the MBA boot protocol.
0 = PXE
1 = RPL
2 = BOOTP
3 = iSCSI_Boot
4 = FCoE_Boot
7 = None
Enables/disables MBA VLAN.
1 = Enable
0 = Disable
Sets MBA VLAN (<65536).
241
Description
83840-546-00 E