Qlogic FastLinQ 3400 Series User Manual page 58

5–Linux Driver Software
Installing Linux Driver Software
11. For FCoE offload and iSCSI-offload-TLV, disable lldpad on QLogic
converged network adapter interfaces. This is required because QLogic
uses an offloaded DCBX client.
lldptool set-lldp –i <ethX> adminStatus=disasbled
12. For FCoE offload and iSCSI-offload-TLV, make sure
/var/lib/lldpad/lldpad.conf is created and each <ethX> block does
not specify "adminStatus" or if specified, it is set to 0 ("adminStatus=0") as
below.
{
};
13. For FCoE offload and iSCSI-offload-TLV, restart lldpad service to apply new
settings
For SLES11 SP1, RHEL 6.4 and legacy versions:
service lldpad restart
For SLES11 SP2:
rclldpad restart
For SLES12:
systemctl restart lldpad
lldp :
eth5 :
{
tlvid00000001 :
{
info = "04BC305B017B73";
};
tlvid00000002 :
{
info = "03BC305B017B73";
};
30 83840-546-00 E