Rep 12.19 Tamper Motor; Rep 12.20 Finisher Rear Door Open Sensor - Xerox Phaser 4600 Service Manual

REP 12.19 Tamper Motor

Parts List on PL 12.35 Item 19
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the right cover, REP 12.11.
3. Remove the left cover, REP 12.1.
4. Remove the top cover, REP 12.18.
5. Disconnect the affected Tamper Motor.
6. Remove 2 screws (metal) that secure the Tamper Motor to the Finisher.
7. Slide the motor to feed the gear through the bracket opening,
Figure 1 Remove the Tamper Motor
Revised
Phaser 4600/4620/4622 Printer Service Manual
WARNING
GP 14.
Figure 1.

REP 12.20 Finisher Rear Door Open Sensor

Parts List on PL 12.35 Item 10
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the right cover, REP
3. Remove the left cover, REP
4. Remove the top cover, REP
5. Release 1 hook that secures the sensor.
6. Disconnect P/J121 to remove the sensor,
Figure 1 Remove the Rear Door Open Sensor
04/2016
4-145
WARNING
GP 14.
12.11.
12.1.
12.18.
Figure 1 .
4 Repairs and Adjustments
REP 12.19, REP 12.20