Mounting Of The Power Pack (Voltage Supply) - Thermo Scientific dionex ic pure water Operating Instructions Manual

Chapter 7
| Installation
Step
1
2
|
Dionex IC Pure system
34

Mounting of the Power pack (voltage supply)

Note Whenever possible, mount the power pack on the wall to the left or right of the Dionex IC
Pure system where it is freely accessible and not come in contact with water for get wet.
CAUTION Take caution to ensure that the plug and the power cable do not get wet. Mount the
power pack with dry hands.
Risk of an electrical shock.
Action
Remove the protective foil on the back of the universal
holder and from the universal adapter and attach the
universal holder to the center of the back of the main
adapter.
Attach universal adapter to a smooth wall surface with
supplied screws or with glue (not provided).
Figure
Universal foil
Universal
adapter
Mains
adapter
Universal adapter
Universal
holder
Wall surface
Thermo Scientific