Thermo Scientific
System control
Contents
• "General" on page 65
• "Operating Modes" on page 66
• "User menu" on page 67
• "OEM menu" on page 72
General
The unit is able to run in three modes: "Nonstop" with continuous recirculation with real time
Conductivity/Resistivity and TOC readings, "Interval" mode with activated pump and UV at regular
intervals to maintain purity during non use, "Analyser" mode when in use with an Dionex Integrion
and Dionex ICS-2100, Dionex ICS-4000, Dionex ICS-5000
ICS-3000 system. TOC is only displayed when the unit is in "Nonstop" and "Analyser" mode.
Conductivity/Resistivity is displayed in every mode.
UV is shown on the display when the UV light in on. TC is showed if temperature compensation is
on. In the event of an error, the fourth line of display will display most current error.
+
, Dionex ICS-5000 or Dionex
Failure message
Dionex IC Pure system | 65