Mounting The Power Pack (Voltage Supply) - Thermo Scientific Barnstead Pacific TII 7 Operating Instructions Manual

7
Installation

Mounting the Power Pack (Voltage Supply)

Step Action
1 Remove the protective foil on the back of the universal
holder and from the universal adapter and attach the
universal holder to the center of the back of the main
adapter.
Pacific Water Purification Systems
38
Whenever possible, mount the power pack on the wall to the left or right of the Pacific water
purification systems where it is freely accessible and not come in contact with water for get
wet.
Take caution to ensure that the suitable plug and the power cable do not get wet. Mount the
power pack with dry hands. Risk of an electrical shock.
Take caution to ensure that only the original equipment from the power supply pack with
sufficient capability is being used.
Figure
Universal foil
Universal
adapter
Mains
adapter
Universal
holder
Thermo Scientific