Switch Temperature Compensation On/Off; Entering The Serial Number - Thermo Scientific dionex ic pure water Operating Instructions Manual

Chapter 12
| System control
|
Dionex IC Pure system
76

Switch temperature compensation on/off

Note Turning the temperature compensation off will cause the displayed purity readings to change
according to the water temperature.
Basic setting: on
Setting range: on, off
After entering the OEM menu, press the "Menu" button ten times. The display shows:

Entering the serial number

Under this menu, the serial number of the unit can be viewed. However, the serial number of the
system is an unalterable factory setting.
After accessing the OEM menu, press the "Menu" button eleven times. The display shows:
Note The system is factory adjusted in the system control. In this section it is not necessary to be
carried out changes of value for operating with an IC system.
Thermo Scientific