Table of Contents
Advertisement
Step
3
4
5
Thermo Scientific
Action
a. Take the power supply unit and press it with
the attached universal holder onto the wall
and then slide it down (see red arrows).
b. Plug the power cable into the power supply
unit.
CAUTION Do not bring the
power pack in contact with water.
Risk of an electrical shock.
Note The removable power cable must always
face downward when the power supply unit has
been mounted.
Now, connect the power supply unit to the
supply"
connection on the right side of the Dionex IC
Pure system. Next plug the power supply to a grounded
100 - 240 VAC, 50/60 Hz power outlet.
Switch the unit on and enter the serial number of the
ultrapure cartridge in the control menu ("Changing the
ultrapure cartridge" ).The unit is ready for use now.
Figure
Power supply unit with
support
Mains adapter
"Power
Power supply
connection on the
unit
Installation |
Universal adapter
Power cable
Dionex IC Pure system | 35
Chapter 7
Advertisement
Table of Contents
