Thermo Scientific
Press the "Menu" key three times. The display shows:
Note You can find more information in chapter "Replacing the UV lamp" on page 89
Ultrapure cartridge serial number
Press the "Menu" key four times to enter the serial cartridge number. The display shows:
Note You can find more information in chapter "Changing the ultrapure cartridge" on page 79.
Rinsing procedure
The fifth press of the "Menu" button enters the Rinse mode. This rinses or flushes the unit to drain.
During the rinse, the pump and solenoid valve (V4) are activated for a programmed period of time as
set in the OEM menu. (see "Set the interval rinse time" on page 74).
Step
Action
1
Press the "Menu" key five times.
The display shows:
2
Confirm rinse by pressing the
"Enter" button. The rinsing is started
for 30 sec.
System control |
Figure
Dionex IC Pure system | 69
Chapter 12