Table of Contents
Advertisement
6
Press the reducing adapter into the
Dionex IC Pure system. When you hear an audible click you can be
sure that the quick-action fasteners have been inserted correctly.
7
Switch on the Dionex IC Pure system and the ion chromatogram.
As soon as the IC is switched on,
display of the Dionex IC Pure system.
Note In the Analyser mode, the Nonstop and Interval modes
are not functional.
8
The Service Manager appears minimized as the Chromeleon Tray Icon
next to the clock in the Notification Area (also called System Tray) of the
Windows Taskbar. To open the Service Manager window, click (or
right-click) the Chromeleon Tray Icon.
9
If the Chromeleon Tray Icon is not present, you can start the Service
Manager by selecting Start> All Programs> Thermo Chromeleon 7>
Services Manager. Closing the Service Manager window minimizes it to
the Chromeleon Tray Icon.
10
In the Chromeleon CDS Server Configuration, open the corresponding
configuration settings and search for the entry "Dionex Integrion and
Dionex ICS-2100" or "Dionex ICS-4000 system" and right-click on the
entry you need.
Note If you are using an Dionex ICS-5000
or Dionex ICS-3000 system you must go to the tab 'Relays'
under the pump settings.
Thermo Scientific
"to pump"
connection on the
"Analyser"
appears on the control
+
, Dionex ICS-5000
Installation |
Device Connection
Reducing adapter
Dionex IC Pure system | 39
Chapter 7
Advertisement
Table of Contents
