Table of Contents
Advertisement
Step
Action
1
Place the external 20 L tank with level control in the direct vicinity
of the central supply system and the Dionex IC Pure system.
2
a. Wet end of the tube with water and insert the o.d. 8 mm
b. Screw the R3/4" feedwater connection onto the
c. Attach the other end of the o.d. 8 mm (0.31in) tubing to
3
a. Wet end of the tube with water and insert the o.d. 8 mm
Thermo Scientific
(0.31 in) X 4 m tube into the feedwater connection kit.
feedwater tap.
the left feedwater connection on the side of the external
20 L tank with level control. Wet the end of the tubing
with water before inserting.
(0.31 in) tube into the right connection of the external
20 L tank with level control for tank overflow.
Figure
a.)
Feedwater connection
kit
c.)
Feedwater/
concentrate
connection, external
20 L tank with level
control
o.d. 8 mm (0.31 in) tube
a.)
Feedwater inlet/
Concentrate
Installation |
Chapter 7
o.d. 8 mm (0.31 in)
tube
Tank
overflow
Dionex IC Pure system | 31
Advertisement
Table of Contents
