Table of Contents
Advertisement
9.3 Mounting the power pack (voltage supply)
Whenever possible, mount the power pack on the wall to the left or right of the ul-
trapure water system where it is freely accessible.
Stick the universal holder which is supplied in the assembly kit to the back of the
power pack as shown in the above Figure.
Stick the universal adapter to a smooth wall surface or screw it to the wall using the
dowels and screws supplied in the assembly kit.
When the universal holder and universal adapter have been fitted, hang the power
pack in.
Plug the connecting cable (appliance cable) in the power pack socket.
Connect the power pack to the ultrapure water system (4-pin power supply connector,
pos. 6).
22
Thermo Scientific Barnstead Smart2Pure
Ultrapure water system
Hide quick links:
Advertisement
Table of Contents
