Changing The Ultrafilter - Thermo Scientific dionex ic pure water Operating Instructions Manual

Chapter 13
| Maintenance
Step Action
6 a.
b. If an optional pretreatment cartridge is installed, remove the
7 Switch the system on.
Step Action
1 Switch the system off and unplug from power supply
|
Dionex IC Pure system
86
Switch off the unit, remove the disinfection adapter by
pressing on the quick-connectors and install the new
ultrapure cartridge (see "Changing the ultrapure cartridge"
on page 79).
cartridge tube jumper by pressing on the quick-connectors at
the connections for the pretreatment cartridge and then
install a new pretreatment cartridge (see "Replacing the
pretreament cartridge (optional)" on page 80).

Changing the ultrafilter

Note You will need the following tools for replacing the ultra-filter: Open-end wrench, size 17,
Phillips screwdriver and Teflon strip
Figure
a.)
Quick-connectors
Adapter for disinfection
b.)
Quick-
connectors
Tube jumper
Figure
Thermo Scientific