Facsimile Information Services; Using The Receiver - Fuji Xerox DocuCentre-II C3000 User Manual

Facsimile Information Services

For information on subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.

Using the Receiver

1
Pick up the receiver of the external
telephone.
2
Select [Manual Receive].
3
Specify the fax number of the
facsimile information service.
The call destination can be specified using the numeric keypad, address numbers,
or one touch buttons. The address book cannot be used.
The call destination can be
specified also with the keyboard
displayed by pressing
[Alphanumeric] or [Symbol]
button.
Note • When the line type is set to a
• If you want to send tones (or to use the touch-tone services) while using a pulse line, select
• Some touch-tone services may not be available even if you set your telephone to send
4
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
5
When input is finished, press the <Start> button.
Note • The <Online> indicator on the control panel lights and reception begins.
6
Place the receiver back in the cradle.
Important • Make sure that the receiver is placed properly in the cradle. Otherwise, the line will remain
pulse line, [Tone (:)] does not
appear.
[Tone (:)].
tones.
"busy".

Facsimile Information Services

4
155