Snmp Trap Hosts - Funkwerk W1002 User Manual

12 External Reporting
196
fields:
Fields in the Basic Parameters menu
Field
SNMP Trap Broadcast-
ing
SNMP Trap UDP Port
SNMP Trap Community

12.3.2 SNMP Trap Hosts

In this menu, you specify the IP addresses to which your device is to send the SNMP traps.
In the External Reporting -> SNMP -> SNMP Trap Hosts menu, a list of all configured
SNMP trap hosts is shown.
12.3.2.1 New
Choose the New button to set up new SNMP trap hosts.
Funkwerk Enterprise Communications GmbH
Description
Select whether the transfer of SNMP traps is to be activated.
Your device then sends SNMP traps to the LAN's broadcast ad-
dress.
The function is activated by choosing
The function is not activated by default.
Only if SNMP Trap Broadcasting is enabled.
Enter the number of the UDP port to which your device is to
send SNMP traps.
Any whole number is possible.
The default value is .
Only if SNMP Trap Broadcasting is enabled.
Enter a new SNMP code. This must be sent by the SNMP Man-
ager with every SNMP request so that this is accepted by your
device.
A character string of between
here.
The default value is
.
and characters is possible
.
funkwerk W1002/W2002/WIx040/WIx065