Link Test - Funkwerk W1002 Manual

funkwerk W2002 V6.0
Command
---------------------------------------|--------------------------------------
1 - Interface
2 - Link state
3 - Alias name
4 - Actual speed [ 54 ]
5 - Manual config[ -> ]
6 - Auto config

7 - Link test

Enable or disable bridge link.
Enter a number or name, "=" main menu, [ESC] previous menu.
9:39:39[admin]>
Checking a Bridge Link (Link Test)
5-32
As soon as both ports are enabled, the link will be set up. The
Actual speed indicates the current transmission rate.
Funkwerk Enterprise Communications WLAN products
Config Ports wl2_br Bridge_links wl2_br1
[ le0 ]
[ enabled ]
[ wl2_br1 ]
[ -> ]
As soon as you have set up a link by means of one of the proce-
dures (automatically or manually), both LAN segments are con-
nected. This means that computers from one segments can estab-
lish a connection with computers from the other segment.
The link test provides all data required to evaluate the quality of
the bridge link. Moreover, the link test supports you when adju-
ting the antenna.
You can learn how to perform a link test in Section
Link Test.
funkwerk Wx002 Bridge Port
Parameters
|
| link state
|
|
|
|
|
|
node0001CD0B426C
Performing a