Removing The Fixing Delivery/Paper Width Sensor Pcb (Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Fixing Delivery/Paper Width Sensor PCB (Simplex Model) > Preparation
6) Free the harness [1] from the guide [A].
7) Remove the Paper Leading Edge Sensor PCB [2].
• 2 Claws [3]
1x
[A]
[1]
2x
[3]
NOTE:
The following shows how to route the harness.
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Fixing Delivery/Paper Width Sensor PCB (Simplex Model) > Preparation
[2] [3]
F-4-480
F-4-481
Removing the Fixing Delivery/Paper Width Sensor PCB
(Simplex Model)
■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2-1) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-2) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
4) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
5) Remove the Upper Cover (Simplex Model) (Refer to page 4-147).
6) Remove the Rear Cover (Simplex Model) (Refer to page 4-149).
7) Remove the Main Controller PCB (Simplex Model) (Refer to page 4-159).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Simplex Model) (Refer to page 4-161).
4-164
F-4-482
4-164