Removing The Flat Bed Motor Unit (Dadf Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure

Removing the Flat Bed Motor Unit (DADF Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the DADF Unit + Reader Unit (Refer to page 4-27).
3) Disconnecting the DADF Unit + Reader Unit (Refer to page 4-30).
4) Remove the Copyboard Glass (DADF Model) (Refer to page 4-44).
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure
F-4-105
■ Procedure
CAUTION:
• Do not lose the 2 spacers [1] of the Contact Image Sensor Unit.
• Do not touch the document reading part [A] of the Contact Image Sensor Unit.
[1]
1) Move the Contact Image Sensor Unit [1].
[1]
4-48
[A]
F-4-106
F-4-107
4-48