Canon i-SENSYS MF229dw Service Manual page 188

4
Disassembly/Assembly > Fixing System (Duplex Model) > Removing the Fixing Assembly (Duplex Model) > Procedure
13) Remove the Fixing Assembly [1].
• 3 Screws [2]
[2]
3x
NOTE: How to install the Fixing Harness
1) Wrap the Fixing Harness [2] around the protrusion [1] of the Harness Holder.
2) Pass it through the Harness Guide [A], and then connect the connector [3].
[2] [1] [2]
4 Disassembly/Assembly > Fixing System (Duplex Model) > Removing the Fixing Assembly (Duplex Model) > Procedure
[1] [2]
F-4-359
[A] [2] [1]
1x
1x
[3]
F-4-360
NOTE:
The following shows how to route the harness.
4-126
F-4-361
4-126