Fax; List Of Sssw - Canon i-SENSYS MF229dw Service Manual

FAX

List of SSSW

• FAX model only
FAX > SSSW
SSSW No. Bit No.
SW 01 (Errors, COPY functions)
Bit 0 Output error codes for service technicians
Bit 1 Error in memory dump
Bit 2 Enter the password for transferring received confidential image
Bit 3 Prohibit COPY
Bit 4 Display No. 300s
Bit 5
Bit 6 Prohibit users from setting date/time
Bit 7 Collectively clear user setting prohibition
SW 02 (Setting for network connection criteria)
Bit 0 Do not start when memory clear list is unable to output
Bit 1
Bit 2
Bit 3
Bit 4 V34 CCRTN OFF
Bit 5
Bit 6
Bit 7 Connect the terminal as F network type 2
SW 03 (Echo measures)
Bit 0 Check EQM of TCF
Bit 1 Apply echo protect tone to V.29
Bit 2
Bit 3
Bit 4 Heard DIS twice
Bit 5 First DIS interference
Bit 6 Interfered DIS frequency
Bit 7 Output 1080Hz before CED
SW 04 (Measures against communication troubles)
Bit 0 Monitor LC
Bit 1 Check CI signal frequency
Bit 2 V21 end flag
Bit 3 Prohibit T.30 node F kept by both parties
Bit 4 T.30 node F echo timer
Bit 5 Check CI signal frequency when setting PBX
Bit 6 Do not send CNG for manual outgoing transmission
Bit 7 Do not send CED for manual incoming transmission
8
Service Mode > FAX > List of SSSW
Function
8 Service Mode > FAX > List of SSSW
FAX > SSSW
SSSW No. Bit No.
SW 05 (Standard functions, DIS signal setting)
Bit 0
Bit 1 mm/inch conversion (text mode)
Bit 2 mm/inch conversion (text and picture / picture mode)
Bit 3 Prohibit DIS from transmitting bit33 and the followings.
Bit 4 Declare cut sheets
Bit 5 Declare LRT/LGL in DIS
Bit 6 Prohibit ECM outgoing transmission
Bit 7 Prohibit ECM incoming transmission
SW 06 (Setting of reading criteria)
Bit 0 Move from DES to pre-scan position
Bit 1 Pre-scan at time other than power-ON
Bit 2 Restrict document length
Bit 3 Stamp option
Bit 4 Reading width 0:A4 1: LTR
Bit 5 Record memory copy time sharing
Bit 6 Variable resolution at COPY
Bit 7 Half tone + super fine
SW 07 Not in use
SW 08 Not in use
SW 09 Not in use
SW 10 Not in use
SW 11 Not in use
SW 12 (Page timer setting)
Bit 0 1 page timeout (outgoing transmission)
Bit 1
Bit 2 1 page timeout (HT transmission)
Bit 3
Bit 4 1 page timeout (incoming transmission)
Bit 5
Bit 6
Bit 7 1 page timeout
SW 13
Bit 0 Prohibit relay broadcasting / transfer while receiving relay / transfer
Bit 1 Response to faulty image while receiving relay / transfer
Bit 2 Convert mm/inch when transmitting received image
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
8-12
Function
8-12