Chapter 3
3) Remove the 2 screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
[2]
[1]
F-3-87
3.1.12.8 Removing the Plate
1) Remove the connector [1] of the ECNT board.
2) Remove the 3 screws [2] and then removes the plate [3].
[3]
[2]
F-3-88
3-22
0007-7562
[1]
3.1.12.9 Removing the Paper
Delivery Sensor
1) Remove the connector [1] on the ECNT board and
take the cable off the cable guide. (The external
cover is omitted from the illustration.)
2) Remove the screw [2] and remove the paper
delivery sensor [3].
[3]
[2]
F-3-89
0007-7563
[1]