Canon i-SENSYS MF229dw Service Manual page 117

4
Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Disconnecting the SADF Unit and the Reader Unit > Procedure
3) Free the harness [1] from the guide [A].
1x
[1]
NOTE: How to Assemble the Harness Cover
As for the guide [A], be sure to install the Harness Cover after routing the harness [2] on
the back side of the Flat Cable [1].
[A]
[1]
[2]
4 Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Disconnecting the SADF Unit and the Reader Unit > Procedure
4) Change the orientation of the Reader Unit so that its bottom surface [1] is facing down.
5) Release the lock [2] and open the SADF Unit [3].
[A]
F-4-126
[A] [2]
[1]
F-4-127
[1]
4-55
[3]
[2]
F-4-128
4-55