Removing The Dadf Separation Pad - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the DADF Separation Pad > Procedure
NOTE: How to assemble the DADF Pickup Roller Unit
1) Assemble it by aligning the spring [1] with the boss [2].
[1]
2) Be sure to align the orientation of the edge [A] of the 2 bushings [1] in the vertical
direction.
• 1 E-ring [2]
3) Be sure to align the gear [3] with the D-cut [B] of the DADF Pickup Roller Shaft.
[1]
[A]
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the DADF Separation Pad > Procedure
[2]
F-4-80
[A]
[B]
[3]
[2]
F-4-81

Removing the DADF Separation Pad

■ Procedure
CAUTION:
• Do not touch the pad surface.
• Do not lose the spring [1] on the back side of the DADF Separation Pad.
[1]
4-41
F-4-82
F-4-83
4-41