Canon i-SENSYS MF229dw Service Manual page 160

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Main Fan (Duplex Model) > Procedure
NOTE: How to assemble the Scanner Cover
1) Be sure to pass the Shutter Open/Close Lever [3] through the hole [A] of the Scanner
Cover.
2) Be sure that the Shutter Open/Close Lever [3] can move vertically.
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Main Fan (Duplex Model) > Procedure
[A]
[3]
F-4-263
[3]
F-4-264
2) Free the Fan Harness [1] from the Harness Guide [A].
• 1 Connector [2]
3) Pass the Fan Harness [1] through the hole [B] of the Right Plate to the outside.
[2] [1]
1x
[A]
[B]
1x
4) Free the harness [1] from the guide [A], and remove the Main Fan [2].
• 2 Claws [3]
1x
[1]
2x
4-98
[B]
[1]
F-4-265
[A]
[2]
[3]
F-4-266
4-98