Removing The Copyboard Glass (Dadf Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Copyboard Glass (DADF Model) > Procedure

Removing the Copyboard Glass (DADF Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the DADF Unit + Reader Unit (Refer to page 4-27).
3) Disconnecting the DADF Unit + Reader Unit (Refer to page 4-30).
■ Procedure
CAUTION:
• Be sure to place the removed Copyboard Glass on a cloth, etc. to avoid damaging
the bottom sheet.
• When removing the Copyboard Glass, be careful not to touch the glass surface.
• If the surface becomes dirty, clean it with lint free paper.
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Copyboard Glass (DADF Model) > Procedure
1) Remove the 2 screws [1].
F-4-91
2) Remove the Copyboard Guide Holder [1].
• 1 Claw [2]
• 1 Hook [3]
F-4-92
2x
[1]
[1]
1x
[2]
4-44
[1]
F-4-93
[3]
F-4-94
4-44