Pickup Feed System (Duplex Model); Layout Drawing; Removing The Pickup Unit (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Unit (Duplex Model) > Preparation

Pickup Feed System (Duplex Model)

Layout Drawing

[1]
[7]
[6]
[5]
No. Name
[1] Delivery Slave Roller Unit
[2] Pickup Unit
[3] Duplex Solenoid
[4] Pickup Tray Unit
[5] Separation Pad
[6] Pickup Roller
[7] Pickup Solenoid
4 Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Unit (Duplex Model) > Preparation
[3]
[4]
F-4-362
Reference Remarks
(Refer to page 4-136)
(Refer to page 4-127)
(Refer to page 4-141)
(Refer to page 4-132)
(Refer to page 4-135)
(Refer to page 4-134)
(Refer to page 4-137)
T-4-45

Removing the Pickup Unit (Duplex Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2-1) Remove the DADF Unit + Reader Unit (DADF Model) (Refer to page 4-27).
2-2) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-3) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
4) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
5) Remove the Upper Cover Unit (Duplex Model) (Refer to page 4-89).
6) Remove the Duplex Feed Guide Unit (Duplex Model) (Refer to page 4-91).
7) Remove the Main Controller PCB (Duplex Model) (Refer to page 4-95).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Duplex Model) (Refer to page 4-107).
9) Remove the Edge Left Cooling Fan (Duplex Model) (Refer to page 4-99).
10) Remove the Separation Pad (Duplex Model) (Refer to page 4-135).
4-127
F-4-363
4-127