Removing The Contact Image Sensor (Dadf Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Contact Image Sensor (DADF Model) > Procedure
4) Remove the Copyboard Glass [1].
CAUTION:
• Do not lose the 2 spacers [1] of the Contact Image Sensor Unit.
• Do not touch the document reading part [A] of the Contact Image Sensor Unit.
[1]
[1]
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Contact Image Sensor (DADF Model) > Procedure
[A]
F-4-97
F-4-98

Removing the Contact Image Sensor (DADF Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the DADF Unit + Reader Unit (Refer to page 4-27).
3) Disconnecting the DADF Unit + Reader Unit (Refer to page 4-30).
4) Remove the Copyboard Glass (DADF Model) (Refer to page 4-44).
■ Procedure
CAUTION:
• Do not lose the 2 spacers [1] of the Contact Image Sensor Unit.
• Do not touch the document reading part [A] of the Contact Image Sensor Unit.
[1]
4-46
F-4-99
[A]
F-4-100
4-46