Removing The Speaker (Fax Model + Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Speaker (Fax Model + Duplex Model) > Procedure
3) Pass the harness [1] through the hole [A] of the Left Side Plate to the inside.
• 1 Connector [2]
• 1 Connector [3] (Fax Model)
[A]
2x
[2]
[3]
4) Remove the Multi Pickup Sensor Unit [1].
• 1 Wire Saddle [2]
• 1 Claw [3]
• 3 Hooks [4]
[1]
1x
1x
[4]
[2]
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Speaker (Fax Model + Duplex Model) > Procedure
[A]
[1]
F-4-326
[3]
[4]
[3]
[4]
[4]
F-4-327

Removing the Speaker (Fax Model + Duplex Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
3) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
■ Procedure
1) Disconnect the Speaker Harness [1], and pass it through the hole [A] of the Left Side Plate
to the inside.
• 1 Connector [2]
• 1 Wire Saddle [3]
1x
[A]
1x
[3]
[1]
[2]
4-116
F-4-328
[A] [1]
F-4-329
4-116