Canon i-SENSYS MF229dw Service Manual page 114

4
Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Removing the SADF Unit + Reader Unit. > Procedure
2) Free the 2 Flat Cables [1] from the Harness Guide [A].
• 4 Ferrite Cores [2]
• 4 Claws [3]
2x
1x
[2]
[1]
4x
[3] [2]
4 Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Removing the SADF Unit + Reader Unit. > Procedure
[2]
[A]
F-4-117
3) Remove the SADF Unit + Reader Unit [1].
• 2 Claws [2]
CAUTION:
• Be sure to install/remove the unit carefully so as not to damage the Flat Cable [3]
and harness [4] with the [A] part.
[A]
[3]
[4]
[3]
• Be sure to place the unit so as not to damage the Flat Cable [3] and harness [4].
[4] [3]
4-52
F-4-118
F-4-119
4-52