Removing The Copyboard Glass (Sadf Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Removing the Copyboard Glass (SADF Model) > Procedure

Removing the Copyboard Glass (SADF Model)

■ Preparation
● Duplex Model
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the SADF Unit + Reader Unit (Refer to page 4-51).
3) Separate the SADF Unit and the Reader Unit (Refer to page 4-54).
● Sinplex Model
1) Remove the Left Cover (Sinplex Model)(Refer to page 4-144).
2) Remove the SADF Unit + Reader Unit (Refer to page 4-51).
3) Separate the SADF Unit and the Reader Unit (Refer to page 4-54).
4 Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Removing the Copyboard Glass (SADF Model) > Procedure
■ Procedure
F-4-163
CAUTION:
• Be sure to place the removed Copyboard Glass on a cloth, etc. to avoid damaging
the bottom sheet.
• When removing the Copyboard Glass, be careful not to touch the glass surface.
• If the surface becomes dirty, clean it with lint free paper.
1) Remove the 2 screws [1].
2x
[1]
4-68
F-4-164
[1]
F-4-165
4-68