Canon i-SENSYS MF229dw Service Manual page 260

■ Printing Results Are Not Satisfactory
● Smudge Marks Appear on the Edge of Printouts
Cause
Do you print data This symptom occurs if a margin is set to none in the printer driver. A margin
without margins? of 1/4" (5 mm) or less around the edge of paper or 3/8" (10 mm) or less
around the edge of envelopes is not printable with the machine. Make sure to
have margins around the document to print.
• Setting in the Printer Driver
[Finishing] > [Advanced Settings] > [Expand Print Region and Print] > [Off]
● Streaks Appear on Printouts
Cause
Are you using appropriate Check usable paper, and replace with appropriate paper.
paper?
Did you just replace the Change one of the <Special Mode B>, <Special Mode Z>,
toner cartridge? Have you <Special Mode C>, <Special Mode D> settings.
not used the printer for a [Menu] > [Adjustment/Maintenance] > [Special Processing]
long period of time?
6
Trouble Shooting > Trouble Shooting Items > Image Faults > Printing Results Are Not Satisfactory
F-6-3
Solution
F-6-4
Solution
T-6-3
6 Trouble Shooting > Trouble Shooting Items > Image Faults > Printing Results Are Not Satisfactory
● White Streaks Appear
Cause
Is toner running Check how much toner is left, and replace the toner cartridges as
low? necessary.
● Toner Smudges and Splatters Appear
T-6-2
Cause
Are you using Check usable paper, and replace with appropriate paper.
appropriate paper?
Change the setting for <Special Mode U>.
[Menu] > [Adjustment/Maintenance] > [Special Processing] > [Special
Mode U] > [On]
Is toner running Check how much toner is left, and replace the toner cartridges as necessary.
low?
F-6-5
Solution
T-6-4
F-6-6
Solution
T-6-5
6-4
6-4