Canon i-SENSYS MF229dw Service Manual page 227

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Fixing Delivery/Paper Width Sensor PCB (Simplex Model) > Procedure
■ Procedure
1) Remove the Wireless LAN Unit [1] (Wifi Model).
• 1 Screw (black TP) [2]
• 2 Hooks [3]
[1]
1x
[3]
[2]
2) Remove the Main Controller PCB Installation Plate [1].
• 1 Wire Saddle [2]
• 4 Screws (with washer) [3]
• 2 Screws (black TP) [4]
1x
6x
[4]
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Fixing Delivery/Paper Width Sensor PCB (Simplex Model) > Procedure
[3]
F-4-483
[1]
[2]
[3]
F-4-484
3) Free the harness [1] from the Harness Guide [A].
• 1 Terminal [2]
[1]
1x
1x
[2]
CAUTION:
Be sure that the terminal [2] is in contact with the Contact Spring [3].
[2]
[3]
4-165
[1]
[A]
[2]
F-4-485
[2]
[3]
4-165
[A]
F-4-486