Canon i-SENSYS MF229dw Service Manual page 112

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure
5) Remove the Flat Bed Motor Unit [1].
• 2 Screws [2]
2x
[2]
CAUTION:
If the Contact Image Sensor Unit comes off, be sure to put the tooth [1] of the belt in the
groove [2] on the bottom of the Contact Image Sensor to install the unit.
[2]
[1]
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure
[2]
[1]
F-4-112
F-4-113
4-50
4-50