Removing The Pickup Solenoid (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Solenoid (Duplex Model) > Preparation
[2] [2]
[1]
4 Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Pickup Solenoid (Duplex Model) > Preparation

Removing the Pickup Solenoid (Duplex Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2-1) Remove the DADF Unit + Reader Unit (DADF Model) (Refer to page 4-27).
2-2) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-3) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
4) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
5) Remove the Upper Cover Unit (Duplex Model) (Refer to page 4-89).
6) Remove the Duplex Feed Guide Unit (Duplex Model) (Refer to page 4-91).
F-4-394
7) Remove the Main Controller PCB (Duplex Model) (Refer to page 4-95).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Duplex Model) (Refer to page 4-107).
9) Remove the Edge Left Cooling Fan (Duplex Model) (Refer to page 4-99).
4-137
F-4-395
4-137