Counter - Canon i-SENSYS MF229dw Service Manual

■ SERIAL
COPIER > OPTION > SERIAL
Sub item Description
SN-MAIN Enter the device serial number written on the rating name plate of the host
machine.
<Input procedure>
1. Write down the value in the "Location" field (blank by default) of System
Management Settings from remote UI or local UI.
-> In the field, the Controller PCB is replaced with a service part.
2. Enter the serial number in "Location" of the system management settings,
and confirm the serial number.
[Menu] > [System Management Settings] > [Device Information Settings] >
[Location]
Device Information Settings
Device Name
Location
3. Temporarily enter the serial number in "Location" (8 alphanumeric
characters).
4. Execute this service mode.
Check that OK is displayed in COPIER > OPTION > SERIAL > SN-MAIN.
SN-MAIN
After execution, turn OFF and then ON the power.
Perform output only when the entered serial number is 8 alphanumeric
characters.
After output, the serial number entered in "Location" will be deleted.
5. After turning ON the power, check the serial number on the system
management data list.
6. Change the setting of "Location" back to the original value. (Enter the
value you wrote down in step 1.)
8
Service Mode > COPIER > COUNTER > TOTAL
Common
to all
models
Yes
Location
12
RUV0021
Symbol
A/a/12 Apply
F-8-3
Result : OK
F-8-4
T-8-18
8 Service Mode > COPIER > COUNTER > TOTAL

COUNTER

■ TOTAL
COPIER > COUNTER > TOTAL
Display/ Setting/ Adjustment rage: 0 ~ 999,999 Return to 0 when exceeding 999,999.
Sub item Description
SERVICE1 Total counter 1 for service
Count up when a paper is ejected from the machine
(regardless of sizes such as large size and small size.)
SERVICE2 Total counter 2 for service
Count up when a paper is ejected from the machine
(regardless of sizes such as large size and small size.)
TTL Total counter (Copier + Printer + FAX + Combination)
COPY Total copy counter
Count up when a paper is ejected from the machine
after execution of copy operation.
PDL-PRT PDL printing counter
Count up when PDL printing, ejecting a paper from
the machine, and duplex stacking. Blank paper is also
counted. Count up by 1 regardless of large or small.
FAX-PRT FAX reception printing counter
Count up when FAX reception printing, ejecting a paper
from the machine, and duplex stacking. Blank paper
is also counted. Count up by 1 regardless of large or
small. It can be cleared.
RPT-PRT Report printing counter
Count up when report printing, ejecting a paper from
the machine, and duplex stacking. Blank paper is also
counted. Count up by 1 regardless of large or small. It
can be cleared.
2-SIDE 2 sided copy/ print counter
Count up the number of passing through the duplex
path in copying/ printing when ejecting a paper from the
machine and duplex stacking.
Blank paper is also counted. Count up by 1 regardless
of large or small. It can be cleared.
SCAN Scanning counter
Count up the number of scanning when scanning is
completed. Count up by 1 regardless of large or small.
It can be cleared.
8-9
Common
FAX Duplex
to all
model Model
models
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
T-8-19
8-9