Canon i-SENSYS MF229dw Service Manual page 222

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Main Controller PCB (Simplex Model) > After Replacing
NOTE:
The layout of the connectors on the Main Controller PCB is shown below.
J1 J2
J14
J600
J6 J22
J903
J No. J No. Symbol
J1 J401 UNIT14 Control Panel PCB
J2 J1601 CIS CIS Sensor
J3 J902 UNIT2 Engine Controller PCB
J4 J1 UNIT13 Wireless LAN PCB
J6 - - -
J7 J1406 PS4 Original Sensor
J7 J1407 PS5 Original Edge Sensor
J11 - M3 Flatbed Motor Unit
J12 J1401 M5 SADF Motor Unit
J14 - - USB
J22 - - -
J600 - - LAN
J901 J1204 UNIT16 FAX NCU PCB
J903 J1201 UNIT16 FAX NCU PCB
J904 - SP1 Speaker
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Main Controller PCB (Simplex Model) > After Replacing
J3
J7 J11 J12
J4
J904
J901
F-4-468
Name Remarks
Wifi Model
SADF Model
SADF Model
SADF Model
FAX Model
FAX Model
FAX Model
T-4-49
■ After Replacing
1) After replacing the PCB, enter the serial number in "Location " of System Management
Settings from remote UI or local UI, and confirm the serial number.
2) Check that OK is displayed in COPIER > OPTION > SERIAL > SN-MAIN.
• For the detailed procedure, refer to the chapter on service mode.
3) COPIER > OPTION > BODY > LOCALE
To set country group.
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
Setting range: 1 - 8 (Service part default value: 2)
4) Execute the following service mode to enable this setting.
COPIER > FUNCTION > CLEAR > ALL
5) If the user has printed the user data list and saved the address book before the
replacement, ask the user to return the settings back to the original values.
• Ask the user to load the address book from remote UI.
1. Start remote UI and log in in administrator mode.
2. [Settings/Registration] > [Import/Export] > [Import]
3. Select the address book file to be imported, and click [Start Importing].
4. Click [OK].
4-160
4-160