Testmode; System; Scan - Canon i-SENSYS MF229dw Service Manual

TESTMODE

SYSTEM

■ DRAM
TESTMODE > SYSTEM > DRAM
Sub item Description
TEST1 Data read/write check for DRAM (except system work area)
■ SPEAKER
TESTMODE > SYSTEM > SPEAKER
Sub item Description
ON When "ON" is selected, entry tone is generated once.
MIN When "MIN" is selected, entry tone is generated once.
MAX When "MAX" is selected, entry tone is generated once.
8
Service Mode > TESTMODE > SCAN > SENSOR
Common to
all models
Yes
T-8-48
FAX Other
model model
Yes No
Yes No
Yes No
T-8-49
8 Service Mode > TESTMODE > SCAN > SENSOR

SCAN

■ ADJUST
● ADF-ADJ
TESTMODE > SCAN > ADJUST > ADF-ADJ
Sub item
DF-SPEED Enter the adjustment value for the magnification ratio in
vertical scanning direction in stream feeding
Setting value: -30 ~ 30(Default value: 0)
DF-OFFSET Enter for the adjustment of DF original stop position
Setting value: -30 ~ 30(Default value: 0)
■ SENSOR
TESTMODE > SCAN > ADJUST > SENSOR
Sub item
TRAY PAPER Display the status of Multi Pickup Sensor
SENSOR 1: Paper existing 0: No paper
REGI SENS Display the status of Leading Edge Sensor
1: Paper existing 0: No paper
ESS DOOR SENS Display the status of Delivery Tray Open/ Close Switch
1: OPEN 0: CLOSE
Description ADF Other
model model
Yes
Yes
Description Common to
all models
Yes
Yes
Yes
8-20
No
No
T-8-50
T-8-51
8-20