Canon i-SENSYS MF229dw Service Manual page 172

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Paper Leading Edge Sensor PCB (Duplex Model) > Procedure
5) Free the harness [1] from the Harness Guide [A].
• 1 Terminal [2]
1x
1x
[2]
CAUTION:
Be sure that the terminal [2] is in contact with the Contact Spring [3].
[2]
[3]
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Paper Leading Edge Sensor PCB (Duplex Model) > Procedure
6) Remove the Harness Retaining Spring [1] from the 2 hooks [2].
[1]
[A]
7) Disconnect the 4 connectors [1].
F-4-304
[2]
[3]
F-4-305
[2]
[1]
4x
[1]
4-110
F-4-306
F-4-307
4-110