Canon i-SENSYS MF229dw Service Manual page 109

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Contact Image Sensor (DADF Model) > Procedure
1) Move the Contact Image Sensor Unit [1].
[1]
2) Remove the 2 spacers [1] and the Flat Cable [2].
• 1 Guide [A]
1x
1x
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Contact Image Sensor (DADF Model) > Procedure
F-4-101
[1]
[2]
[A]
[1]
F-4-102
3) Remove the Contact Image Sensor [1].
• 2 Shafts [2]
[1]
CAUTION:
If the Contact Image Sensor Unit comes off, be sure to put the tooth [1] of the belt in the
groove [2] on the bottom of the Contact Image Sensor to install the unit.
[2]
[1]
4-47
[2]
[2]
F-4-103
F-4-104
4-47