Canon i-SENSYS MF229dw Service Manual page 111

4
Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure
2) Press the gear [1] to bend the belt [2], and remove the belt [2] from the gear [3].
CAUTION:
Grease is applied on the shaft [4] of the Contact Image Sensor, so be careful not to let
the belt [2] come in contact with the shaft.
[4]
[2]
[3]
4 Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure
[2]
F-4-108
[1]
F-4-109
3) Remove the Guide Cover [1].
• 1 Claw [2]
1x
[2]
4) Free the harness [1] and the Grounding Wire [2] from the hole [A] of the Reader Unit and
the Harness Guide [B].
1x
[B]
[1]
[2]
4-49
[1]
F-4-110
[A]
F-4-111
4-49