Removing The Pickup Tray Unit (Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Tray Unit (Simplex Model) > Procedure
NOTE:
The following shows how to route the harness.
4 Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Tray Unit (Simplex Model) > Procedure

Removing the Pickup Tray Unit (Simplex Model)

■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2-1) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-2) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
4) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
5) Remove the Upper Cover (Simplex Model) (Refer to page 4-147).
6) Remove the Rear Cover (Simplex Model) (Refer to page 4-149).
7) Remove the Separation Pad (Simplex Model) (Refer to page 4-187).
■ Procedure
F-4-544
1) Remove the 4 screws (black TP) [1] and the 6 screws [2].
F-4-545
[1]
10x
[2]
4-184
[2]
F-4-546
4-184